In order to use schematic symbols imported from the web or custom created for your project (very common), you must create a custom symbol li...
Showing posts with label custom part. Show all posts
Showing posts with label custom part. Show all posts
Popular Posts
-
Before using Cadence, configure it for optimal performance by following the instructions below. Step 1. Create a Cadence Folder Hierarchy ... -
How do I manually route a design in PCB Editor? Your design should have a board outline and components placed, and blue lines (the "... -
Introduction When drawing a circuit, you will often move and delete components as part of the process, meaning that the reference designat... -
What is a board outline? A board outline is the outermost boundary of a printed circuit board design. It is used by the PCB manufacturer t... -
Introduction When drawing a schematic, crossing wires can make the schematic difficult to read and follow signals (see example, Figure 1).... -
You can use VCC (power) and GND (ground) symbols to connect power and ground instead of manually routing wires across your schematic. This... -
How do I measure the spacing between pins to make sure my footprint matches the Datasheet? See the How to check your footprints using the Or... -
Why would I need to change the library search path? When creating a custom PCB footprint for a component, it is stored somewhere on your c... -
Introduction A PCB footprint is the physical layout on a PCB to which a component is soldered. Usually, you must create a custom PCB fo... -
There are a number of tutorials available for creating schematics in Cadence. The best tutorials are in videos, as the manuals and online he...
