Microcontrollers make wonderful "brains" for embedded systems, but are severely limited in the amount of current...
Showing posts with label transistor. Show all posts
Showing posts with label transistor. Show all posts
Popular Posts
-
What is a board outline? A board outline is the outermost boundary of a printed circuit board design. It is used by the PCB manufacturer t... -
Introduction When drawing a circuit, you will often move and delete components as part of the process, meaning that the reference designat... -
Why would I need to change the library search path? When creating a custom PCB footprint for a component, it is stored somewhere on your c... -
How do I measure the spacing between pins to make sure my footprint matches the Datasheet? See the How to check your footprints using the Or... -
While it is easy to place components using the mouse, most designs require precise placement of some components (e.g., to align parallel hea... -
You can use VCC (power) and GND (ground) symbols to connect power and ground instead of manually routing wires across your schematic. This... -
There are a number of tutorials available for creating schematics in Cadence. The best tutorials are in videos, as the manuals and online he...
-
Before using Cadence, configure it for optimal performance by following the instructions below. Step 1. Create a Cadence Folder Hierarchy ... -
Introduction A PCB footprint is the physical layout on a PCB to which a component is soldered. Usually, you must create a custom PCB fo... -
Introduction When drawing a schematic, crossing wires can make the schematic difficult to read and follow signals (see example, Figure 1)....
