1. In Windows, open the Design Entry CIS program. This program allows you to edit schematics, and will be used to export a netlist describi...
Microcontrollers make wonderful "brains" for embedded systems, but are severely limited in the amount of current...
Once you know the types of components that you need for your project, the next step is to find sources/vendors from which you can purchase t...
An interrupt is a signal received by a microcontroller and emitted by hardware or software that is signaling a system event that needs imme...
The Cypress Programmable System on a Chip (PSoC®) is a mixed-signal electronic hardware platform that integrates a microcontroller core,...
There are several Cypress Programmable System on a Chip (PSoC®) hardware development kits available for use in designs. The list below d...
In order to program a Cypress Programmable System on a Chip (PSoC®) , you first need to install Integrated Development Environment (IDE) so...
Popular Posts
-
Before using Cadence, configure it for optimal performance by following the instructions below. Step 1. Create a Cadence Folder Hierarchy ... -
How do I manually route a design in PCB Editor? Your design should have a board outline and components placed, and blue lines (the "... -
Introduction When drawing a circuit, you will often move and delete components as part of the process, meaning that the reference designat... -
What is a board outline? A board outline is the outermost boundary of a printed circuit board design. It is used by the PCB manufacturer t... -
Introduction When drawing a schematic, crossing wires can make the schematic difficult to read and follow signals (see example, Figure 1).... -
You can use VCC (power) and GND (ground) symbols to connect power and ground instead of manually routing wires across your schematic. This... -
How do I measure the spacing between pins to make sure my footprint matches the Datasheet? See the How to check your footprints using the Or... -
Why would I need to change the library search path? When creating a custom PCB footprint for a component, it is stored somewhere on your c... -
Introduction A PCB footprint is the physical layout on a PCB to which a component is soldered. Usually, you must create a custom PCB fo... -
There are a number of tutorials available for creating schematics in Cadence. The best tutorials are in videos, as the manuals and online he...
